Changing exhaust stack

Horizontal smokers with a side firebox and tuning plates.
Post Reply
jrgreene1968
beginner
beginner
Posts: 5
Joined: March 22nd, 2020, 7:49 pm

Changing exhaust stack

Post by jrgreene1968 » May 27th, 2022, 8:11 pm

Howdy all.. I’ve been tinkering with a used smoker I bought, and have it working fairly well, but wanting to change the exhaust setup. Whoever built it, they have the stack coming out of the top of the cc, and I’d like to move it to grate level. Is there much difference between using a collector like on franklins, vs just welding a 90 in?
Thanks



sandro
Wants to build a smoker
Wants to build a smoker
Posts: 25
Joined: April 21st, 2021, 9:47 am
Contact:

Re: Changing exhaust stack

Post by sandro » May 28th, 2022, 12:42 am

I don't think there is a tangible, measurable difference as long as the stack is properly sized and the pit is built to draw properly. What I will admit is that it definitely looks cool.



jrgreene1968
beginner
beginner
Posts: 5
Joined: March 22nd, 2020, 7:49 pm

Re: Changing exhaust stack

Post by jrgreene1968 » May 28th, 2022, 9:13 am

Thanks buddy.. I was kinda thinking along those lines, although I do like the look.



Post Reply

Return to “Standard Offsets”