new offset build

Horizontal smokers with a side firebox and tuning plates.
Post Reply
Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » August 26th, 2021, 7:32 pm

dacolson wrote:
August 26th, 2021, 7:07 am
One of the easiest things you can do is use a blocking log. Just lay a log on your grate at the fb end of the pit to redirect heat away from the grate.
Or, you can try making a throat baffle like you mentioned - a lot of builders angle them down, I angle mine up. You can read about mine in my Ben Hur build. I posted some temp tests I ran as well.
https://smokerbuilder.com/forums/viewto ... =13&t=7888


TBH, however, 25° diff is pretty good.


Sent from my iPhone using Tapatalk
Cool, thank you. I have some 3” angle iron and the I think 5/16” 6’ X 24/26” that I might cut some tuning plates and play with. I’ll put some probes down and see what the cooking grates actually see.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

Brewmaster
Needs more Steel
Needs more Steel
Posts: 135
Joined: April 25th, 2021, 6:23 pm

Re: new offset build

Post by Brewmaster » August 26th, 2021, 7:46 pm

It's always fun trying to fine-tune these things, but I'll just add that it's pretty "normal" for the firebox end to always be hotter for the first foot or so of the grate space, I think most of us come to realize it's good to have another heat zone. Unless you put a 3 or 4 ft long firebox on it, it's the nature of the beast so to speak. :D

Good luck!



dacolson

new offset build

Post by dacolson » August 26th, 2021, 9:00 pm

Daves87gn wrote: Cool, thank you. I have some 3” angle iron and the I think 5/16” 6’ X 24/26” that I might cut some tuning plates and play with. I’ll put some probes down and see what the cooking grates actually see.
I did a standard with tuning plates for a buddy a while back. I only fired it a couple times but it seemed pretty easy to handle. Just reached out to him. He’s really happy with it. And it’s an easy mod to make.


Sent from my iPhone using Tapatalk



Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » August 26th, 2021, 10:25 pm

The pizza 1/2 calabrese 1/2 BBQ, man was it good. Wife couldn’t pick a favorite, I liked the BBQ, both were amazing. The slices missing stayed with my brother in law, cost of business I guess 🤣.
21ADC0A6-FD19-4A3B-B8E3-6A6ACBFE1432.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
hogaboomer
Expert
Expert
Posts: 909
Joined: July 15th, 2019, 9:47 am
Title: old pipe welder
BBQ Comp Team Name: Not competing yet...
Location: Groves, TX.

Re: new offset build

Post by hogaboomer » August 26th, 2021, 10:46 pm

I've done a few smokers with tuning plates, I found 3/16 x 6 inches wide worked out pretty good. Put them right above the throat. They work really well for evening out temps side to side.
I've been trying to see if I can build without them here lately, but I still seem to need one or two to help regulate things.


I live on Hogaboom Road.

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » August 26th, 2021, 11:52 pm

hogaboomer wrote:
August 26th, 2021, 10:46 pm
I've done a few smokers with tuning plates, I found 3/16 x 6 inches wide worked out pretty good. Put them right above the throat. They work really well for evening out temps side to side.
I've been trying to see if I can build without them here lately, but I still seem to need one or two to help regulate things.
hey hogaboomer,

if you don't mind me asking, how many tuning plates and how far apart? I could use a starting point and work from there


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
hogaboomer
Expert
Expert
Posts: 909
Joined: July 15th, 2019, 9:47 am
Title: old pipe welder
BBQ Comp Team Name: Not competing yet...
Location: Groves, TX.

Re: new offset build

Post by hogaboomer » August 27th, 2021, 8:31 am

However many you need to get all the way across, with a gap at the end for convection. Put them real close together at the firebox side, and a little farther apart as you go across. I put them on rails, so I can adjust them on the fly, according to what the probes read. It all depends on how hot your fire is.


I live on Hogaboom Road.

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » September 16th, 2021, 12:13 am

update, I put the perforated metal over the expanded metal in the firebox and it was to restrictive. the firebox side was almost 100* hotter than the stack side, it took about 20 minutes to settle back to normal after removing the perforated metal.

I did add some rails to the CC and have 2 plates cut and plan to cut some more in the next few days.

I cooked 3 +8lbs pork butts for labor day weekend everybody loved them.

question, I have seen how some pits only have 1 gauge by the smoke stack, when I had the 3 butts I had them on the same rack side by side by the stack and the temps were significantly lower on that gauge compared to the others. I assume it was because of the mass of meat by that gauge, how do you adjust for that with just one gauge?

do you just try to maintain the target temp say 275* even if that means that the actual temp on the other side is closer to 325-340?

I got the Meater probes the day after the butts but will be smoking some brisket in the next few weeks and record temps.

food pic
IMG_1066.jpg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

dacolson

Re: new offset build

Post by dacolson » September 16th, 2021, 8:00 am

Temp gauges on the outside of the pit are not much use for accuracy of what your temps actually are at the grate. Your MEATER probes can get you ambient temp which will be more accurate. I only use my external gauges so I can see if temps are rising or dropping or if one side is much hotter than the other.


Sent from my iPhone using Tapatalk



User avatar
Dirtytires
Expert
Expert
Posts: 3735
Joined: November 24th, 2015, 12:36 am
Title: It ain't broke...yet
BBQ Comp Team Name: Dont compete...cook for events once in a while
Location: Phoenix, Az

Re: new offset build

Post by Dirtytires » September 16th, 2021, 9:36 am

I clip a remote probe to the grate on either side of my meat. ObViously they are going to be different so I just try to keep them within range of my target temp. The door gauges are pretty much eye candy only...I use mine to tell me if my pit is warming up or cooling down based on which side is hotter.



User avatar
Big T
Moderator
Moderator
Posts: 6796
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: new offset build

Post by Big T » September 16th, 2021, 7:12 pm

:yth:


Measure Twice.....Cut Three Times.

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » September 22nd, 2021, 10:53 pm

thanks guys


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » November 6th, 2021, 4:35 pm

Finally got to use the grill side
291A1A80-011C-4A1B-A44C-2131BCFD501A.jpeg
94B0C290-E520-423B-9794-DAB6C24B4D98.jpeg
EA343F3D-29CF-43BB-86DE-35E6FC7D77EE.jpeg
04E7DBB4-BD3F-4578-9609-87229317C9A9.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
towtruck
Expert
Expert
Posts: 1212
Joined: August 4th, 2018, 4:50 pm

Re: new offset build

Post by towtruck » November 6th, 2021, 6:47 pm

Looks good!



Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » December 4th, 2021, 7:11 pm

Got some pork loin from Costco on sale, we’ll see how the final product turns out, but here’s some pictures for now.
FC1D423F-9358-46E5-9CA2-2A5BE2657D50.jpeg
F0C47A74-99C8-40E1-88F0-BF5C6AF86236.jpeg
7405F281-68F3-4996-A5B0-B25FB061A2FB.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » January 3rd, 2022, 2:14 am

Forgot to add the pictures of the finished product, it was amazing. Cooked at 180 ( which started of difficult) and seared at the end.
3BCDF8E8-4B3E-410E-8661-BA3B115FCDFF.jpeg
92AC1097-4C02-4BDC-85D8-98338D27F644.jpeg
4FC0E8CB-70AE-48FC-9E98-633B232B5377.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
Big T
Moderator
Moderator
Posts: 6796
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: new offset build

Post by Big T » January 3rd, 2022, 10:27 pm

Looks great :needfood:


Measure Twice.....Cut Three Times.

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » May 7th, 2022, 10:48 pm

so I have a rotisserie from my gas grill, decided to take some of the scrap metal I had and make a stand so I can cook rotisserie over the open firebox. I will clean the stands and paint them during the week and hopefully next weekend cook a chicken.
image01.jpeg
image1 (1)1.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
Dirtytires
Expert
Expert
Posts: 3735
Joined: November 24th, 2015, 12:36 am
Title: It ain't broke...yet
BBQ Comp Team Name: Dont compete...cook for events once in a while
Location: Phoenix, Az

Re: new offset build

Post by Dirtytires » May 8th, 2022, 9:54 am

Cool idea. Rotisserie chicken is good but smoking it is better!



User avatar
towtruck
Expert
Expert
Posts: 1212
Joined: August 4th, 2018, 4:50 pm

Re: new offset build

Post by towtruck » May 8th, 2022, 6:27 pm

I put a small spit in my smoker and it smokes a whole bird beautifully. I plan on putting in a 4' spit rod once I can get my hands on a motor to turn it. I want to be able to cook two or three turkeys at once or a 75 pound pork roast.



Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » May 26th, 2022, 12:33 am

it was probably the best whole chicken I've/we've ever had.
1chicken.jpeg
3chicken.jpeg
chicken.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

Daves87gn
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 96
Joined: September 17th, 2020, 1:53 pm
Title: I fix stuff
BBQ Comp Team Name: I burn stuff
Location: Pasadena CA

Re: new offset build

Post by Daves87gn » May 29th, 2022, 9:16 pm

0DB247D8-5429-47F5-B68E-0A3501D1BFDF.jpeg
You do not have the required permissions to view the files attached to this post.


some gas stuff, some pellet stuff, and some stick burner stuff with some car stuff mixed in

User avatar
towtruck
Expert
Expert
Posts: 1212
Joined: August 4th, 2018, 4:50 pm

Re: new offset build

Post by towtruck » May 30th, 2022, 9:41 am

Nice....you are motivating me to get my big spit installed....



ThinBlue
Needs more Steel
Needs more Steel
Posts: 131
Joined: September 16th, 2021, 8:15 am
Title: Serious goof
BBQ Comp Team Name: Not competing yet...
Contact:

Re: new offset build

Post by ThinBlue » June 15th, 2022, 2:02 pm

I love it!

Sent from my GM1917 using Tapatalk




Post Reply

Return to “Standard Offsets”