Baffle plate height

Discussion about Reverse Flow Smokers
Post Reply
ntjones
Wants to build a smoker
Wants to build a smoker
Posts: 29
Joined: January 25th, 2018, 10:28 pm

Baffle plate height

Post by ntjones » November 30th, 2019, 12:01 am

If I put my baffle plate 2.5 inches below my cook grate will that be enough space? That’s about as much as I can get. I just hope that will work.


Sent from my iPhone using Tapatalk



User avatar
towtruck
Expert
Expert
Posts: 563
Joined: August 4th, 2018, 4:50 pm

Re: Baffle plate height

Post by towtruck » November 30th, 2019, 2:21 pm

It should work out fine. You may get a little hot on the fire box end. If that is all you could get it is what it is. In my odd ball smoker my grates are only 1" off the floor and the fire is below 1" of steel.



ntjones
Wants to build a smoker
Wants to build a smoker
Posts: 29
Joined: January 25th, 2018, 10:28 pm

Re: Baffle plate height

Post by ntjones » November 30th, 2019, 2:29 pm

towtruck wrote:It should work out fine. You may get a little hot on the fire box end. If that is all you could get it is what it is. In my odd ball smoker my grates are only 1" off the floor and the fire is below 1" of steel.
Ok thanks. I’ll go with it.


Sent from my iPhone using Tapatalk



Post Reply

Return to “Reverse Flow Smokers”