Wood burning stove style reverse flow smoker.

Discussion about Reverse Flow Smokers
Post Reply
User avatar
inkslinger
Smokerbuilder
Smokerbuilder
Posts: 64
Joined: April 22nd, 2017, 9:24 am
Title: Tattoo/Brew/BBQ
BBQ Comp Team Name: Not competing yet...
Contact:

Re: Wood burning stove style reverse flow smoker.

Post by inkslinger » August 30th, 2018, 9:59 pm

Getting so close now. Wont be much longer.


Sent from my iPhone using Tapatalk


............
Tattooer / Brewer / BBQer

User avatar
Rodcrafter
Moderator
Moderator
Posts: 8447
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: Wood burning stove style reverse flow smoker.

Post by Rodcrafter » August 31st, 2018, 3:19 pm

Sweet


Making memories!


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 4th, 2018, 1:57 pm

Thanks guys, I am indeed am so close to being about 50% done, I have ordered the gas struts and have trialled their fit with success, the clearance was tight, and I am real pleased with results.

I bought a flue with damper, from a pizza oven, I am keen to close this part of the project, so decided this was sensible thing to buy. I could make everything, latch and hinges etc, but you have to balance it out, or else you will get lost in the detail, and never get done.

Took a video of the gas struts in operation, even a baby can operate. Pleased as punch.

Few pics below

https://youtu.be/ix455jJdMRY


https://youtu.be/7Wj6Za-NPbY
You do not have the required permissions to view the files attached to this post.
Last edited by SouthamptonSmoker on September 4th, 2018, 1:59 pm, edited 1 time in total.



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 4th, 2018, 1:57 pm

rest of pics...
You do not have the required permissions to view the files attached to this post.




User avatar
ajfoxy
Expert
Expert
Posts: 1890
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: Wood burning stove style reverse flow smoker.

Post by ajfoxy » September 4th, 2018, 3:41 pm

Very nice. That is looking very flash. :kewl:


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

User avatar
Big T
Moderator
Moderator
Posts: 5091
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Wood burning stove style reverse flow smoker.

Post by Big T » September 4th, 2018, 4:09 pm

The struts make short work of opening the door for sure. :kewl:


Measure Twice.....Cut Three Times.

richy20
Wants to build a smoker
Wants to build a smoker
Posts: 34
Joined: June 15th, 2015, 7:45 pm

Re: Wood burning stove style reverse flow smoker.

Post by richy20 » September 4th, 2018, 4:44 pm

That is so awesome!!! Great work :kewl:



JRINNE
Smokerbuilder
Smokerbuilder
Posts: 51
Joined: November 12th, 2017, 1:32 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Central Nebraska

Re: Wood burning stove style reverse flow smoker.

Post by JRINNE » September 4th, 2018, 9:57 pm

Very nice work, that thing is sweet.



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 5th, 2018, 1:50 pm

Thanks guys, was real pleased with how they work out.

I got the flue today, and did a trial fit, I can work with this for sure. It needs cutting down to correct length, but wont do that until a lot later, be nice if it drafts good without the extension on, as that looks real neat.

Few pics below.
You do not have the required permissions to view the files attached to this post.



User avatar
towtruck
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 208
Joined: August 4th, 2018, 4:50 pm

Re: Wood burning stove style reverse flow smoker.

Post by towtruck » September 6th, 2018, 1:31 pm

I'm liking that short stack.



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 11th, 2018, 1:28 pm

I really like that short stack too. Not sure if I can keep it that small though, as until I design the bottom half, I am unsure if there will be a y piece into this flue, or another flue. My preference is the y piece, but when I am using the stove and oven, I need to send pallets through this thing, which I don't want the smoke going through the cook chamber.

Progress feels slow, but it is the nature of the beast now, it is slow monotonous task.

Still some kinda before and after pictures below. I am getting there for sure!!
You do not have the required permissions to view the files attached to this post.



User avatar
ajfoxy
Expert
Expert
Posts: 1890
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: Wood burning stove style reverse flow smoker.

Post by ajfoxy » September 12th, 2018, 1:56 am

Yep, definitely looking good.


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 16th, 2018, 1:28 pm

Getting close to being done on the burnishing, so I thought I would put it back in the frame to have a feel for how it is going to look.

Strap a heat gun to the frame to see how it would perform. Seemed to get up to temp in about 30 mins of so, and was a 1.6kw heat gun. Was a bit imbalanced heat wise, but the baffle plate is not properly fitted yet, it is a bit warped and I am going to put a gasket on it.

Few pictures below.
You do not have the required permissions to view the files attached to this post.
Last edited by SouthamptonSmoker on September 16th, 2018, 1:30 pm, edited 1 time in total.



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 16th, 2018, 1:30 pm

Rest of the pics.
You do not have the required permissions to view the files attached to this post.



User avatar
ajfoxy
Expert
Expert
Posts: 1890
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: Wood burning stove style reverse flow smoker.

Post by ajfoxy » September 16th, 2018, 5:46 pm

It is defintely starting to take shape now. Great work as usual... :kewl:


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » September 17th, 2018, 10:49 am

Thanks Aj

I went back to check the temp in the cook chamber over 2 hours later. The baffle plate was still hot to touch, it had gone from 225 to 140. I am pretty happy with that. If a 1.6kw heat gun can get this going, I feel pretty confident in the design now. Heat loss will be further improved when i actually install the gaskets on the door and baffle plate.

Got some special shafts to make to hold the gas struts, then I will likely move on to the drawing the bottom half, as the rest other than that is purely cosmetic.

There is however a good couple more weekends work of sanding, but this can be done at any time, and I am keen to see things move forward again.




SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » October 7th, 2018, 12:40 pm

Make a couple little shaft for the struts, now i have moved onto the drawing.

Got a few pictures, but i still quite early on, so might be difficult to interpret.

The bottom half will be insulated with 50mm ceramic blanket. The oven then has an cavity of 50mm to allow heat to travel all around the oven, both the firebox and oven will be able to damp independantly.

I will be able to send just the firebox straight out the flue, and have everything else off. IE bypass both smoker and oven, and i will be able to turn each on independtly.

The flue will have a y piece on the section on the smoker, and the firebox and oven flue will join in, this will come from the rear of the both, it is quite difficult to explain and i have not drawn it yet. i will add a fabrication on the back, like a rectangle section, which will receive the smoke from both the oven box and firebox, if there dampers are open, a flue will come out of this at the end, at the same place the other flue is. The aim here is when you look directly at it from the front, you shouldnt see the second one, as it wil be behind it, and hidden by the riser as well.

Few pictures of progress.
You do not have the required permissions to view the files attached to this post.



User avatar
towtruck
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 208
Joined: August 4th, 2018, 4:50 pm

Re: Wood burning stove style reverse flow smoker.

Post by towtruck » October 7th, 2018, 1:01 pm

That is going to be sharp looking. I also like the control you will have on the exhaust.



User avatar
AndrewPalmer71
Needs more Steel
Needs more Steel
Posts: 143
Joined: December 29th, 2016, 2:54 am
Title: SmokinAddict
BBQ Comp Team Name: Not competing yet...

Re: Wood burning stove style reverse flow smoker.

Post by AndrewPalmer71 » October 7th, 2018, 2:45 pm

This build is breathtaking. Feels like I am watching "how its made." Keep up the awesome work.

Sent from my SM-J727V using Tapatalk




Chromeski
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 242
Joined: July 20th, 2018, 6:59 pm

Re: Wood burning stove style reverse flow smoker.

Post by Chromeski » October 9th, 2018, 2:32 am

Definitely a next level build here. A true craftsman



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » October 14th, 2018, 11:26 am

Thanks guys.

Managed to progress the drawings further this weekend. Will be another few weekends before they are done but it is coming along nicely.

Few pictures below of the drawings.
You do not have the required permissions to view the files attached to this post.



SouthamptonSmoker
Senior SmokerBuilder
Senior SmokerBuilder
Posts: 94
Joined: June 28th, 2018, 2:41 am

Re: Wood burning stove style reverse flow smoker.

Post by SouthamptonSmoker » October 14th, 2018, 11:27 am

rest of the pics
You do not have the required permissions to view the files attached to this post.



User avatar
towtruck
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 208
Joined: August 4th, 2018, 4:50 pm

Re: Wood burning stove style reverse flow smoker.

Post by towtruck » October 14th, 2018, 12:02 pm

Very nice.......what is the brown colored damper going to control?



Post Reply

Return to “Reverse Flow Smokers”