Stack Exit Location from CC
-
- beginner
- Posts: 5
- Joined: January 15th, 2017, 6:22 pm
Stack Exit Location from CC
I am new to smoker building. I just purchased "How to build your own BBQ smokers" CD from E-bay.
The Author, James Jones from Waxahachie, TX , recommends that the exhaust should exit at or slightly below the level of the bottom cook rack. Either out of the end of the CC with a 90 degree angle, or, down through the top inside the CC with a 45 degree angle. Otherwise your smoker will loose all its heat out of the top, also he states that with his method will you less fuel.
I have noticed several different methods on various professionally constructed smokers.
I would like to know what feedback/advise some members of this forum have to offer on this subject.
Thank You! MVP
The Author, James Jones from Waxahachie, TX , recommends that the exhaust should exit at or slightly below the level of the bottom cook rack. Either out of the end of the CC with a 90 degree angle, or, down through the top inside the CC with a 45 degree angle. Otherwise your smoker will loose all its heat out of the top, also he states that with his method will you less fuel.
I have noticed several different methods on various professionally constructed smokers.
I would like to know what feedback/advise some members of this forum have to offer on this subject.
Thank You! MVP
- Big T
- Moderator
- Posts: 5640
- Joined: September 1st, 2013, 2:40 pm
- Title: Go Getter
- BBQ Comp Team Name: Backyard Boys
- Location: Lower Alabama
Re: Stack Exit Location from CC
There's been a lot of debate about this very subject and there's not a definitive answer. I have built a few smokers of various designs and I have always put the stack as high as possible on the CC and I've never had any issues. I've seen guys on here that have dropped their stacks down low on the CC and they swear by it. I think that you need to consider the overall design of the smoker before you decide on a stack location. We had a new member join the forum recently because he built a cooker based off of a very popular design and he was having major temp issues. He posted some pictures and Tom was able to help him correct his problems, they were caused by the height and size of the throat in relation to the size and location of the stack exit. If you are really wanting to build a tried and true design, you should take a look at smokerplans.net. The plans are easy to read and they come with tech support by the Guru himself OB1.
Measure Twice.....Cut Three Times.
- Rodcrafter
- Moderator
- Posts: 8456
- Joined: July 21st, 2012, 5:46 pm
- Title: Member
- BBQ Comp Team Name: Not competing yet...
- Location: Orlando, Florida
Re: Stack Exit Location from CC
It would be hard to say more than what BigT said and I agree. I go high as possible on mine
Making memories!
Making memories!
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
- mp4
- Expert
- Posts: 1152
- Joined: September 2nd, 2014, 6:28 pm
- Title: Independent Thinker
- BBQ Comp Team Name: Just a few backyard for fun competitions.
- Location: Central Wisconsin
Re: Stack Exit Location from CC
The thought behind a lower stack exit is to keep more smoke in the cook chamber. Sounds like a good thing except...how does that smoke get out? Some would say that it doesn't evacuate and the smoke stagnates and you get stale smoke flavor. That's the debate in a nutshell. Let us know what you decide!
-
- beginner
- Posts: 5
- Joined: January 15th, 2017, 6:22 pm
Re: Stack Exit Location from CC
Thank you all for your time/advice. Going with BigT mounting high on CC.
MVP
MVP
-
- beginner
- Posts: 14
- Joined: March 12th, 2017, 2:27 pm
Re: Stack Exit Location from CC
Good discussion. If the FB vent is in line with the FB/CC vent which is in line with the stack opening, that's a straight shot through the system.
See Post #7 in this thread http://www.smokingmeatforums.com/t/142517/three-some
A Jambo-type flare from the FB to the CC seems like it would circulate the air up there. Seems like. I haven't heard people feel a Jambo was too smokey
Firebox flare:

Exhaust above grate:

See Post #7 in this thread http://www.smokingmeatforums.com/t/142517/three-some
A Jambo-type flare from the FB to the CC seems like it would circulate the air up there. Seems like. I haven't heard people feel a Jambo was too smokey
Firebox flare:
Exhaust above grate:
- Pete Mazz
- Moderator
- Posts: 2955
- Joined: February 16th, 2013, 8:19 am
- Title: Meathead
- Location: Bucks County, PA
Re: Stack Exit Location from CC
I've never seen a Jambo in action but I can't fathom how the area below the grate gets any appreciable heat/smoke besides what circulates around.
If it's tourist season, how come I can't shoot 'em?
Don't speak the language? Try this: Smoker Terminology
Try my SmokerBuilder Calculators
Don't speak the language? Try this: Smoker Terminology
Try my SmokerBuilder Calculators
-
- beginner
- Posts: 14
- Joined: March 12th, 2017, 2:27 pm
Re: Stack Exit Location from CC
Hi Pete-
It seems a little odd. I thought so too.
Franklin builds his rigs very similarly http://video.klru.tv/video/2365513482/
His firebox is up quite high to deliver the heat into the CC above the grate. His stack vent is centered on the grate. Another example of a Downdraft traditional flow. He just omitted the flare that Jambo popularized.
It seems a little odd. I thought so too.
Franklin builds his rigs very similarly http://video.klru.tv/video/2365513482/
His firebox is up quite high to deliver the heat into the CC above the grate. His stack vent is centered on the grate. Another example of a Downdraft traditional flow. He just omitted the flare that Jambo popularized.
- Rodcrafter
- Moderator
- Posts: 8456
- Joined: July 21st, 2012, 5:46 pm
- Title: Member
- BBQ Comp Team Name: Not competing yet...
- Location: Orlando, Florida
Re: Stack Exit Location from CC
I really liked the video, I have never used a smoker designed like that. But if it works the way he wants it I'm fine with that. I noticed that as he showed us the different pits he has really one favorite. That means the others aren't. So he has learned some things along the way. The ones I have made are very different than each other but they cook great and it depends on what is cooking or how much to determine which one I use. Thanks for sharing it.
jm2cw
jm2cw
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
-
- beginner
- Posts: 14
- Joined: March 12th, 2017, 2:27 pm
Re: Stack Exit Location from CC
Franklin talks about his feeling that you want a lot of free airflow across the meat. He discusses this as to why he has the vents the way he does. Same theory as Jambo employs.
This is a subtle thing. LIke RF vs standard. It's always more about the cook than the cooker
This is a subtle thing. LIke RF vs standard. It's always more about the cook than the cooker
- Rodcrafter
- Moderator
- Posts: 8456
- Joined: July 21st, 2012, 5:46 pm
- Title: Member
- BBQ Comp Team Name: Not competing yet...
- Location: Orlando, Florida
Re: Stack Exit Location from CC
It looked to me like it is so free flowing that he doesn't even use vents he leaves the door open with a over sized stack so the air moves through. I can see the reasoning behind it and I see the difference of controlled flow too, as it allows me to make the most use of the fuel and adjust-ability.
jm2cw
jm2cw
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
-
- beginner
- Posts: 14
- Joined: March 12th, 2017, 2:27 pm
Re: Stack Exit Location from CC
Franklin ports it in up high, while Jambo adds the flare - and ports it in up high. So Jambo sort of tosses the air up to then fall down over the meat. Subtle difference - not sure it matters