"Beauty,,, the beast" 500 gal RF Build
-
- Wants to build a smoker
- Posts: 25
- Joined: April 26th, 2018, 11:19 am
- Title: Member in training
- BBQ Comp Team Name: Not competing yet...
"Beauty,,, the beast" 500 gal RF Build
yup, i think, i like that
first build named "Beauty,,, the beast"
Hi all,,,
been looking around for a little and wow,, you guys have some great ideas.
started my build a couple of days ago,,, building it for use by our lodge.
first build
a 500 gallon RF with cabinet
you never seem to know how big 500 gallons is until you crawl inside (no easy feat for me!)
thought the sides were going to be 1/4 ,,, was wondering why the plasma was toughing it out until the first door got lifted and 3/8 walls.
and oh yeah,,, doors must go all of 80 + lbs. amazing.
noch is cut for the FB,,, going to offset it about 1 1/2 inches out,,, overlap from tank to spherical end.
much grinding and cleanup to do.
first build named "Beauty,,, the beast"
Hi all,,,
been looking around for a little and wow,, you guys have some great ideas.
started my build a couple of days ago,,, building it for use by our lodge.
first build
a 500 gallon RF with cabinet
you never seem to know how big 500 gallons is until you crawl inside (no easy feat for me!)
thought the sides were going to be 1/4 ,,, was wondering why the plasma was toughing it out until the first door got lifted and 3/8 walls.
and oh yeah,,, doors must go all of 80 + lbs. amazing.
noch is cut for the FB,,, going to offset it about 1 1/2 inches out,,, overlap from tank to spherical end.
much grinding and cleanup to do.
Ideas are a dime a dozen.
But the men, who implement them are "One in a Million"
But the men, who implement them are "One in a Million"
- Dirtytires
- Expert
- Posts: 2310
- Joined: November 24th, 2015, 12:36 am
- Title: It ain't broke...yet
- BBQ Comp Team Name: Dont compete...cook for events once in a while
- Location: Phoenix, Az
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome to the journey.... glad to have you sharing your build.
- Big T
- Moderator
- Posts: 5649
- Joined: September 1st, 2013, 2:40 pm
- Title: Go Getter
- BBQ Comp Team Name: Backyard Boys
- Location: Lower Alabama
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome aboard!! Start a build thread and post some pictures.
Measure Twice.....Cut Three Times.
- ajfoxy
- Expert
- Posts: 2251
- Joined: April 12th, 2016, 8:07 pm
- Title: Neophyte Smoker Bldr
- BBQ Comp Team Name: Not competing yet...
- Location: Brisbane, Queensland, Australia
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome to the crew... yes pictures make it so much easier to share your enthusiasm... 

Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.
Whether you think that you can, or that you can't, you are usually right. Henry Ford
Whether you think that you can, or that you can't, you are usually right. Henry Ford
- Pete Mazz
- Moderator
- Posts: 2956
- Joined: February 16th, 2013, 8:19 am
- Title: Meathead
- Location: Bucks County, PA
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome
If it's tourist season, how come I can't shoot 'em?
Don't speak the language? Try this: Smoker Terminology
Try my SmokerBuilder Calculators
Don't speak the language? Try this: Smoker Terminology
Try my SmokerBuilder Calculators
- Elmacho
- Big Time SmokerBuilder
- Posts: 184
- Joined: June 28th, 2014, 9:03 pm
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome aboard. Can’t wait to see this build progress!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- Wants to build a smoker
- Posts: 25
- Joined: April 26th, 2018, 11:19 am
- Title: Member in training
- BBQ Comp Team Name: Not competing yet...
Re: "Beauty,,, the beast" 500 gal RF Build
Thanks for the Welcome,,,,first week'
thinking this is like building an airplane,,,, just when you think your almost finished,,you have 90% to go.
next is handles and counterweights,,,, never expected the doors to weigh like that,,, 80+ lb each
sheared steel for the FB should arrive in 3 or 4 days,,,
need to do a weight and balance to place it on the trailer,,, converting an old boat trailer, single 3500lb axle.
later all
s progress,,,thinking this is like building an airplane,,,, just when you think your almost finished,,you have 90% to go.

next is handles and counterweights,,,, never expected the doors to weigh like that,,, 80+ lb each
sheared steel for the FB should arrive in 3 or 4 days,,,
need to do a weight and balance to place it on the trailer,,, converting an old boat trailer, single 3500lb axle.
later all
You do not have the required permissions to view the files attached to this post.
Ideas are a dime a dozen.
But the men, who implement them are "One in a Million"
But the men, who implement them are "One in a Million"
-
- Wants to build a smoker
- Posts: 25
- Joined: April 26th, 2018, 11:19 am
- Title: Member in training
- BBQ Comp Team Name: Not competing yet...
Re: "Beauty,,, the beast" 500 gal RF Build
decision on hinge selection,,, the local trailer store had these in stock
Welding is done using lincoln .035 flux core
I was never a flux core fan,, but this is really working out well and with some minor adjustment my technique is slowly improving. (been a couple of years since I've welded this much.
Welding is done using lincoln .035 flux core
I was never a flux core fan,, but this is really working out well and with some minor adjustment my technique is slowly improving. (been a couple of years since I've welded this much.
Ideas are a dime a dozen.
But the men, who implement them are "One in a Million"
But the men, who implement them are "One in a Million"
- Big T
- Moderator
- Posts: 5649
- Joined: September 1st, 2013, 2:40 pm
- Title: Go Getter
- BBQ Comp Team Name: Backyard Boys
- Location: Lower Alabama
Re: "Beauty,,, the beast" 500 gal RF Build
There's a lot more work that goes in to building one of these things than most people realize. You should start you a build thread over in the RF section so that it'll be easier for people to find and follow your build.



Measure Twice.....Cut Three Times.
- Rodcrafter
- Moderator
- Posts: 8456
- Joined: July 21st, 2012, 5:46 pm
- Title: Member
- BBQ Comp Team Name: Not competing yet...
- Location: Orlando, Florida
Re: "Beauty,,, the beast" 500 gal RF Build
Welcome to the crew!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........
- ajfoxy
- Expert
- Posts: 2251
- Joined: April 12th, 2016, 8:07 pm
- Title: Neophyte Smoker Bldr
- BBQ Comp Team Name: Not competing yet...
- Location: Brisbane, Queensland, Australia
Re: "Beauty,,, the beast" 500 gal RF Build
Looking good so far... 

Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.
Whether you think that you can, or that you can't, you are usually right. Henry Ford
Whether you think that you can, or that you can't, you are usually right. Henry Ford
- Frank_Cox
- Site Admin
- Posts: 7017
- Joined: January 17th, 2011, 6:30 pm
- Title: OB1
- BBQ Comp Team Name: Team SmokerBuilder- Competition BBQ Team
KCBS Cert. BBQ Judge - Location: Missouri
- Contact:
Re: "Beauty,,, the beast" 500 gal RF Build
welcome aboard buddy!
looking good!!
looking good!!
Click here : How to Upload Pics (Video) | Click here : Are you on FaceBook? |
--->Click here : Need plans for your build? OR Message me at ---->>> https://m.me/SmokerPlans
--->Are you interested in building smokers for profit?
Click here : Shoot me a PM to learn about a new opportunity launching soon!
--->Click here : Need plans for your build? OR Message me at ---->>> https://m.me/SmokerPlans
--->Are you interested in building smokers for profit?
Click here : Shoot me a PM to learn about a new opportunity launching soon!
- Dirtytires
- Expert
- Posts: 2310
- Joined: November 24th, 2015, 12:36 am
- Title: It ain't broke...yet
- BBQ Comp Team Name: Dont compete...cook for events once in a while
- Location: Phoenix, Az
-
- Wants to build a smoker
- Posts: 25
- Joined: April 26th, 2018, 11:19 am
- Title: Member in training
- BBQ Comp Team Name: Not competing yet...
Re: "Beauty,,, the beast" 500 gal RF Build
moving over to the RF builder thread
Ideas are a dime a dozen.
But the men, who implement them are "One in a Million"
But the men, who implement them are "One in a Million"
-
- Wants to build a smoker
- Posts: 25
- Joined: April 26th, 2018, 11:19 am
- Title: Member in training
- BBQ Comp Team Name: Not competing yet...
Re: "Beauty,,, the beast" 500 gal RF Build
Ideas are a dime a dozen.
But the men, who implement them are "One in a Million"
But the men, who implement them are "One in a Million"
- Big T
- Moderator
- Posts: 5649
- Joined: September 1st, 2013, 2:40 pm
- Title: Go Getter
- BBQ Comp Team Name: Backyard Boys
- Location: Lower Alabama