home made pipe burner help

Coach Finn · Post by **Coach Finn** » May 23rd, 2013, 8:16 pm

First, i would like to thank everyone for the wealth of information that I have spent time reading...I have learned alot...but i got a few questions on where to start...
I have a 120 gal tank that I am converting to a small cooker...I want to put to pipe burners in the bottom...
What size ID/OD pipe should I use? 1"..1 1/4"...1 1/2" ?
I want to cut slits with a portaband...thinking 1.5" apart? starting 8 inches from venturi?
Also I want to use a venturi with an air adjust...also a valve to adjust gas flow...
I guess bell reducers are the best way to go??
any suggestions on sizes and parts for building something like this is GREATLY APPRECIATED!!
In other words...if this was your build how would you build the burners????I would like to build my own unit...being that custom prebuilt units are expensive and funds are limited....(family of five on 2 teachers salary...in NC mind you..hahaha)
PICS ARE VERY HELPFUL....Thanks ya'll for any help..Coach

TuscaloosaQ · Post by **TuscaloosaQ** » May 24th, 2013, 5:17 am

heed these words please unless, unless, unless you have a shutdown system on that burner do no do it for no reason. this is what might happen

http://www.thesmokering.com/forum/viewt ... sc&start=0

The Czar · Post by **The Czar** » May 24th, 2013, 5:59 am

Thanks for posting the link TQ!!!

Please read everybody if you haven't already...

Sent from my iPhone using Forum Runner

alleyrat58 · Post by **alleyrat58** » May 24th, 2013, 11:04 am

DC do you have Frank's safety thread handy?

Coach, this comes up frequently. If you're not a professional with gas I strongly recommend you hire it out to someone who is and can put proper safety valves in place as well as the right sized burner. I understand budgets, but gas in a smoker is not the place to cut corners. Convenience is not worth your health or your life.

Sent from my SPH-D710 using Tapatalk 2

The Czar · Post by **The Czar** » May 24th, 2013, 11:24 am

Alley… I haven't been near my computer recently so I would have to see it on my computer to find it… Which is my whole problem right now…

Sent from my iPhone using Forum Runner

alleyrat58 · Post by **alleyrat58** » May 24th, 2013, 12:57 pm

I found it...
Click here : Frank's Flame Safety Thread

We're all a little lost without OB1 around. I have so much free time...

Smokeone · Post by **Smokeone** » May 24th, 2013, 1:25 pm

AR- Get something done then. : D

Sent from my iPhone using Forum Runner

SmokerBuilder.com

home made pipe burner help

home made pipe burner help

Re: home made pipe burner help

Re: home made pipe burner help

Re: home made pipe burner help

Re: home made pipe burner help

Re: home made pipe burner help

Re: home made pipe burner help